GROUNDTEST EQUIPMENT
  • Home
  • Calibration
  • Equipment
    • Aggregates >
      • Sieves & Accessories
      • Sieve Shakers
      • Sample Splitters
      • Sand Equivalent Kit
      • Clay Index Kit
      • ALD & AGD Apparatus
      • Los Angeles Abrasion Machine
      • Specific Gravity Frame & Baskets
      • Density, Voids & Absorption
      • Cleanness Value Agitator & Washing Vessel
      • Weathering Index Roller & Tray
      • Crushing Value Apparatus (ACV)
    • Soil & Road Base >
      • Augers & Accessories
      • Sampling & Classification
      • Field Inspection Testers
      • Scala Penetrometers
      • Impact Soil Tester (Clegg)
      • Plate Bearing Test Apparatus
      • Particle Size Analysis
      • Atterberg Limits
      • Universal Proctor/CBR Automatic Compactor
      • Standard & Heavy Compaction (Proctor)
      • California Bearing Ratio (CBR) Apparatus
      • Vibrating Compaction Hammer
      • Moisture Content Determination
      • Sample Preparation
      • Chemical Tests Apparatus
      • Permeability Apparatus
      • Field CBR Test Set
      • Sand Replacement Test Sets
    • Concrete & Cement >
      • COMPACT-Line Concrete Compression Machines
      • SMART-Line Control Consoles
      • Control Consoles for Advanced Testing
      • Flexural Testing Frames
      • Concrete Pipe Testers
      • Concrete Mixers
      • Concrete Moulds
      • Concrete Specimen Curing
      • Specimen Grinding Machines
      • Cutting & Coring Machines
      • NEX® Monitoring System
      • TruMatch™ NEX® Curing
      • Workability & Consistency of Fresh Concrete
      • Air Entrainment Meters
      • Bleeding & Density of Fresh Concrete
      • SCC Testing Apparatus
      • Gyratory Compactor for Cement & Concrete
      • Water Permeability Apparatus
      • Concrete Compaction
      • Concrete Mortar Penetrometers
      • NDT Strength Evaluation Apparatus
      • NDT Quality & Homogeneity Evaluation
      • NDT Durability Test Apparatus
      • NDT Structural Inspection & Monitoring
      • Cement & Grout Moulds
      • Mortar Mixers
      • Cement Specimen Curing
      • Compression-Flexural Cement Testers
      • Soundness by Le Chatelier
      • Setting Time & Consistency
    • Asphalt & Bitumen >
      • Standard Asphalt & Bitumen Test Equipment >
        • Centrifuge Binder Extractors
        • Filterless Centrifuge Binder Extractors
        • Solvent Recovery Unit
        • Binder Recovery Apparatus
        • TMSG (Rice) Apparatus
        • Marshall Apparatus
        • Skid Resistance & Friction Tester
        • Road Surface Irregularity Measurement
        • Benkelman Beam Apparatus
        • Sand Circle Apparatus
        • Dynamic & Kinematic Viscometers
        • Bacon Sampler
        • Flash Point Testers
        • Distillation of Cut-Back Asphalt apparatus
        • Determination of Solubility Set
        • Particle Charge Tester
        • Emulsified Asphalt Distillation Apparatus
        • Setting Tendency of Bitumen Emulsions
      • IPC Global Performance-Based Test Equipment >
        • Automatic Binder Extractors
        • Laboratory Mixers
        • Shearbox Compactor
        • Slab Roller Compactors
        • Cutting & Coring Machines
        • Wheel Trackers
        • Gyratory Compactors
        • Mixture Perfomance Testers
        • Universal Testing Machines
        • Modular Asphalt Testers
        • Stand-alone Testers
        • Dynamic Test Accessories
        • Binder Penetrometer
        • Rotational Viscometer
        • PAV & VDO
        • RTFO Ovens
        • Ductilometers
        • Ring and Ball Apparatus
        • Bending Beam Rheometer
        • Dynamic Shear Rheometer
    • Soil & Rock Mechanics >
      • Consolidation Apparatus
      • Shear Testing Equipment
      • Static Triaxial Systems
      • Dynamic Triaxial Systems
      • Resonant Column
      • Triaxial Cells
      • Rock Sample Preparation
      • Behavior of Joints
      • Rock Classification
      • Uniaxial & Triaxial Systems
      • Rock Permeability & Durability
      • Uniaxial & Triaxial Accessories
    • General Lab >
      • Ovens & Hot Plates
      • Balances & Weights
      • Thermometers & Hydrometers
      • Measuring Instruments
      • Laboratory Glassware
      • Porcelain, Plastic & Misc
      • Laboratory Hardware
      • General Purpose Equipment
      • Drying Test Chambers
      • Laboratory Fume Extraction
    • Universal Testers >
      • UTM - HPT Series
      • Automatic Computerized UTM
      • Cold Bend Testing Machine
      • UNIFRAME Universal Testers
  • NDM
    • NDM Troxler Gauges
    • NDM Survey Meter
    • NDM Shipping
    • NDM Training
  • Hire
  • Documents
  • News
  • Contact Us
    • Meet the Team
    • Join our Team

Stand-Alone Testers

AASHTO T245 | EN 12697-23 | AASHTO T193 | ASTM D1883 | EN 13286-47 | ASTM D6925 | EN 12697-44 | ASTM D8044 | AASHTO TP124 | AASHTO T283 | ASTM D6931 | ASTM D8225 | EN 12697-48 | AASHTO T393 | ASTM WK71466 | EN 12697-44 | ASTM D8044 | AASHTO TP124
Balanced Loader
Balanced Loader
Balanced Loader
BALANCED LOADER is a new addition in the range of Controls / IPC Global universal automatic testers. The machine is designed to automatically perform most of the tests included into Balanced Mix Design procedures, including IDEAL-CT, IDEAL-RT, Indirect Tensile Strength, Semi-Circular Bend test and many more.

76-PV1282: BALANCED LOADER, 50kN automatic compression testing machine with digital control and readout unit, motorized ram, two-column structure and adjustable crossbeam. 230V/50-60Hz/1Ph

This model features a wide two-column frame which is fitted with an upper crossbeam that can be set at various heights depending on the accessories to be used. The 50kN capacity jack is driven by a brushless motor, housed in an ergonomic cabinet. Closed-loop control ensures reliable test execution both with displacement and load applications. No external transducer is required for displacement measurement. Sample failure is detected automatically and stops the test. Alternatively this feature can be disabled and a travel or time limit can be set instead.

This model is equipped with adjustable limit switches, mounted on one column. The interface is granted by a 7'' capacitive color touchscreen display allowing the setting of speed/load and travel/load limits, data format download and graph settings, and saving of multiple pre-set test procedures. Real-time test graph and transducer data are displayed on the touchscreen.
Test data can be stored on 16GB internal memory, transferred to a USB pen drive or downloaded through LAN or RS232 communication port. All accessories have to be ordered separately.

BALANCED LOADER can perform following tests:
Marshall  ASTM D6925 / AASHTO T245 EN 12697-34
Splitting Tensile/TSR ASTM D6931 / AASHTO T283 EN 12697-23
Indirect Tensile - Italian method 3/4 displ. CNR 134
Semi-Circular Bend SCB IFIT - AASHTO T393/TP124 Luisiana - ASTM D8044 EN 12697-44 IDEAL-CT ASTM D8225 IDEAL-RT ASTM WK71466
Direct Shear ISS - AASHTO TP114
Leutner - EN 12697-48 CBR ASTM D1883 / AASHTO T193 EN 13286-47
Unconfined compression EN ISO 17892-7 
Picture

SCB EmS
SCB EmS
The new SCB EmS is a fully automatic stand-alone test system. Utilizing our environmentally friendly Electromechanical Servoactuation (EmS) technology, it quickly determines the cracking resistance of asphalt specimens with accuracy, repeatability and compliance to standards.

79-PV0310: SCB EmS automatic Semi-Circular Bend testing machine.
Complete with PC software. PC and SCB test jigs not included and must be ordered separately. 100-220 V, 50-60 Hz, 1 ph

Silent, compact and highly performing, the SCB EmS is run by our ingenious AutoSCB software. Pre-programmed with testing procedures conforming to international standards, our AutoSCB software will guide you from initial set-up through the full test including the critical slope and energy calculations.

The Semi Circular Bend test determines the cracking resistance properties of a semi-circular asphalt specimen (cut from a Gyratory Compactor sample) with a notch cut parallel to the loading axis. The test is performed at constant vertical displacement until specimen failure. Typically, fracture energy parameters are calculated from the load/vertical displacement graph, to rank the resistance of asphalt mixtures to cracking.

SCB tester EmS is compatible with a range of SCB jigs conforming to the main international standards. ASTM/AASHTO SCB jigs are also compatible with IPC Global dynamic UTMs, AMPTs and AsphaltQubes.
Picture

Stand-alone SCB
Stand-alone SCB
The Semi-Circular Bend Tester features a rigid two-column load frame with easily adjustable crosshead. The cabinet houses the load jack, motorized actuator and digital control system in one compact setup.

34-V1172/SCB: MULTISPEED automatic compression testing machine with digital control and readout unit, motorized ram, two-column structure and adjustable crossbeam. Supplied without load cell (to be ordered separately). Including firmware for automatic performance of Marshall, CBR, Indirect Tensile and Semi-Circular Bend test (to EN 12697-44, ASTM D8044, AASHTP TP124). 220-240 V, 50-60 Hz, 1 Ph

Automatic control of the test speed/travel by the microprocessor controller. Prior to the test, the operator can set travel limits to automatically end the test. The firmware allows calibrating the transducers and setting up to 10 test profiles and saving data onboard. Real-time test graphs and transducer data are displayed on the touchscreen.

The Semi-Circular Bend Tester has built-in data acquisition system with four channels dedicated to two strain gauge load cells and two potentiometric linear transducers; one of each can be used during the test. It is important to note that the processing unit controls the speed in a closed-loop mode, avoiding speed calibrations and tension fluctuation effects.

The user-interface is a large touchscreen graphic display while test data can be stored on a USB pen drive or downloaded through a LAN communication port.
Picture

Back to Asphalt & Bitumen
Back to Equipment

Services

Calibration
Hire
Equipment

Company

Documents
News
Meet the Team

Support

Contact Us
P: 09 634 1509
​E: [email protected]
© COPYRIGHT Groundtest Equipment Ltd. 2022
​ALL RIGHTS RESERVED.

  • Home
  • Calibration
  • Equipment
    • Aggregates >
      • Sieves & Accessories
      • Sieve Shakers
      • Sample Splitters
      • Sand Equivalent Kit
      • Clay Index Kit
      • ALD & AGD Apparatus
      • Los Angeles Abrasion Machine
      • Specific Gravity Frame & Baskets
      • Density, Voids & Absorption
      • Cleanness Value Agitator & Washing Vessel
      • Weathering Index Roller & Tray
      • Crushing Value Apparatus (ACV)
    • Soil & Road Base >
      • Augers & Accessories
      • Sampling & Classification
      • Field Inspection Testers
      • Scala Penetrometers
      • Impact Soil Tester (Clegg)
      • Plate Bearing Test Apparatus
      • Particle Size Analysis
      • Atterberg Limits
      • Universal Proctor/CBR Automatic Compactor
      • Standard & Heavy Compaction (Proctor)
      • California Bearing Ratio (CBR) Apparatus
      • Vibrating Compaction Hammer
      • Moisture Content Determination
      • Sample Preparation
      • Chemical Tests Apparatus
      • Permeability Apparatus
      • Field CBR Test Set
      • Sand Replacement Test Sets
    • Concrete & Cement >
      • COMPACT-Line Concrete Compression Machines
      • SMART-Line Control Consoles
      • Control Consoles for Advanced Testing
      • Flexural Testing Frames
      • Concrete Pipe Testers
      • Concrete Mixers
      • Concrete Moulds
      • Concrete Specimen Curing
      • Specimen Grinding Machines
      • Cutting & Coring Machines
      • NEX® Monitoring System
      • TruMatch™ NEX® Curing
      • Workability & Consistency of Fresh Concrete
      • Air Entrainment Meters
      • Bleeding & Density of Fresh Concrete
      • SCC Testing Apparatus
      • Gyratory Compactor for Cement & Concrete
      • Water Permeability Apparatus
      • Concrete Compaction
      • Concrete Mortar Penetrometers
      • NDT Strength Evaluation Apparatus
      • NDT Quality & Homogeneity Evaluation
      • NDT Durability Test Apparatus
      • NDT Structural Inspection & Monitoring
      • Cement & Grout Moulds
      • Mortar Mixers
      • Cement Specimen Curing
      • Compression-Flexural Cement Testers
      • Soundness by Le Chatelier
      • Setting Time & Consistency
    • Asphalt & Bitumen >
      • Standard Asphalt & Bitumen Test Equipment >
        • Centrifuge Binder Extractors
        • Filterless Centrifuge Binder Extractors
        • Solvent Recovery Unit
        • Binder Recovery Apparatus
        • TMSG (Rice) Apparatus
        • Marshall Apparatus
        • Skid Resistance & Friction Tester
        • Road Surface Irregularity Measurement
        • Benkelman Beam Apparatus
        • Sand Circle Apparatus
        • Dynamic & Kinematic Viscometers
        • Bacon Sampler
        • Flash Point Testers
        • Distillation of Cut-Back Asphalt apparatus
        • Determination of Solubility Set
        • Particle Charge Tester
        • Emulsified Asphalt Distillation Apparatus
        • Setting Tendency of Bitumen Emulsions
      • IPC Global Performance-Based Test Equipment >
        • Automatic Binder Extractors
        • Laboratory Mixers
        • Shearbox Compactor
        • Slab Roller Compactors
        • Cutting & Coring Machines
        • Wheel Trackers
        • Gyratory Compactors
        • Mixture Perfomance Testers
        • Universal Testing Machines
        • Modular Asphalt Testers
        • Stand-alone Testers
        • Dynamic Test Accessories
        • Binder Penetrometer
        • Rotational Viscometer
        • PAV & VDO
        • RTFO Ovens
        • Ductilometers
        • Ring and Ball Apparatus
        • Bending Beam Rheometer
        • Dynamic Shear Rheometer
    • Soil & Rock Mechanics >
      • Consolidation Apparatus
      • Shear Testing Equipment
      • Static Triaxial Systems
      • Dynamic Triaxial Systems
      • Resonant Column
      • Triaxial Cells
      • Rock Sample Preparation
      • Behavior of Joints
      • Rock Classification
      • Uniaxial & Triaxial Systems
      • Rock Permeability & Durability
      • Uniaxial & Triaxial Accessories
    • General Lab >
      • Ovens & Hot Plates
      • Balances & Weights
      • Thermometers & Hydrometers
      • Measuring Instruments
      • Laboratory Glassware
      • Porcelain, Plastic & Misc
      • Laboratory Hardware
      • General Purpose Equipment
      • Drying Test Chambers
      • Laboratory Fume Extraction
    • Universal Testers >
      • UTM - HPT Series
      • Automatic Computerized UTM
      • Cold Bend Testing Machine
      • UNIFRAME Universal Testers
  • NDM
    • NDM Troxler Gauges
    • NDM Survey Meter
    • NDM Shipping
    • NDM Training
  • Hire
  • Documents
  • News
  • Contact Us
    • Meet the Team
    • Join our Team