Density, Voids & Absorption of Aggregates
EN 1097-3 | AASHTO T121 | AASHTO T19 | ASTM C138 | ASTM C29 | EN 1097-6 | BS 812:2 | AASHTO T84 | ASTM C128
|
Specific Gravity & Absorption of Fine Aggregate Set includes products that are needed and used in testing for the specific gravity of fine aggregates to AASHTO T84 and ASTM C128.
SG-1: Specific Gravity & Absorption of Fine Aggregate Set (available as individual items) The included Pycnometer Jar has a 1qt (0.95L) volume capacity and screw-on tapered brass top with rubber gasket and pour-hole. The seamless metal conical Mould is 3in (75mm) high with a top inside diameter of 1.6in (40mm) and a bottom inside diameter of 3.5in (90mm). The metal tamper is 340g (0.75lb) with a 1in (25mm) face. |
|
Precision Cast Aluminum Unit Weight Measures are preferred to determine the unit weight, yield, and gravimetric air content of fresh concrete or void content of aggregates to ensure high-quality pavements and structures.
Measures meet ASTM C29, ASTM C138, and AASHTO T19, AASHTO T121 specifications, and are machined for superior accuracy. Integral handles are formed into the corrosion-resistant aluminum castings. Measures are water-tight with top and bottom true and even. Rugged construction prevents deformation under rough usage. HM-10: 1ft³ (28.3L) Aluminum Unit Weight Measure HM-11: 1/2ft³ (14.2L) Aluminum Unit Weight Measure HM-12: 1/3 ft³ (9.4L) Aluminum Unit Weight Measure HM-13: 1/10ft³ (2.8L) Aluminum Unit Weight Measure Strike-off Plates are square and made of 0.25in (6.4mm) thick corrosion-proof aluminum and are useful for striking off samples for various volume and mass determinations in aggregate and concrete testing. HMA-493: 16x16in (406x406mm) Strike-Off Plate is for use with HM-10 HMA-492: 12x12in (305x305mm) Strike-Off Plate is for use with HM-11 HMA-491: 10x10in (254x254mm) Strike-Off Plate is for use with HM-12 HMA-490: 8x8in (203x203mm) Strike-Off Plate is for use with HM-13 Accessory: G-C0140: Tamping rod 16mm dia. x 600mm long |
|
Stainless steel construction with handles. The top rim is smooth and plane and parallel to the bottom conforming to EN standards.
48-D0446/1: Bulk density measure 1 liter capacity 48-D0446/5: Bulk density measure 5 liters capacity 48-D0446/10: Bulk density measure 10 liters capacity 48-D0446/20: Bulk density measure 20 liters capacity Accessories: 34-T0099: Straight edge 22-T0040/1: Glass plate 300x300 mm |