Cutting & Coring Machines
NZTA M10
Advanced Automated Asphalt Saw, AUTOSAW II from IPC Global is an automated specimen clamping and sawing system for fast, accurate cutting of beams from asphalt prisms prepared in the PReSBOX or slab compactor and for trimming cylinders from GALILEO, GYROCOMP, SERVOPAC and other gyratory compactors.
77-PV47105: AUTOSAW II, Automated Asphalt Saw, complete with asphalt Multi-slab Jig. Blade not included. 400 V, 50 Hz, 3 ph Main features:
An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position automatically. The Autosaw includes the multislab jig. Completed with the suitable accessory, can be used to cut also asphalt cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request). Cutting speed is operator selectable for optimum specimen finish and throughput. The asphalt saw allows an easy-to-use sawing systems for fast, accurate cutting of beams for asphalt prisms to be used in the different tests. Complete with table and clamping device for slabs, water pump for cooling the blade and filtering system. Ideal for Research and Central laboratories. The Autosaw can be used as part of your Superpave performance based testing program. |
Universal asphalt and concrete saw, MULTISAW is a unique machine specifically designed by IPC Global for laboratory use to precisely cut Asphalt, Concrete and Rock samples.
77-PV47005: MULTISAW, asphalt saw, complete with multi-slab jig. Blade not included. 400V / 50 / 3ph An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position by a user-friendly hand wheel. The Multisaw includes the multislab jig, complete with table and manual clamping device for slabs. Cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request). The Multisaw allows an easy-to-use sawing system for the Four-Point Bending Beam tests, Two Point Bending Beam tests, TSRST, Texas Overlay Test, Prall Test, Semi-Circular Bend Test, Wheel Tracking Tests with large and small devices, or any concrete beam or cylinder. The system allows cylindrical cores with diameters from 100 to 150 mm, and 200 mm dia. to be quickly and accurately cut to different lengths from 10 to 300 mm. 77-PV47000/1: Diamond blade 650 mm dia. for asphalt 77-PV47000/C1: Diamond blade 650 mm dia. for concrete 77-PV47000/2: Sacrificial PVC tube for 100 mm dia. core (consumable) 77-PV47014: Manual core locking Jig for round cores, from 38 to 200 mm diam., to cut samples with manual feeding, from 10 to 300 mm length. 77-PV47020: Trapezoidal specimens jig to be used in Two Point Bending Test, according to EN 12697-24 and 26. 77-PV47025: Jig for Wheel Tracking cores according to AASHTO T324, Semi-Circular Bend test samples according to EN 12697-44 / AASHTO TP105 / AASHTO Draft (except the notch) and Disk Shaped Compact Tension samples according to ASTM D7313 (except the notch and two holes ). 76-PV47014 is also required. 77-PV47030: Jig for Texas Overlay Test according to TX-248-F. 77-PV47011 or PV47014 is required. |
IPC Global's Multi Core-Drill is a superior laboratory asphalt core drill whose robust and rigid design provides a precise coring of asphalt prisms, cylindrical and slab samples to the highest quality.
77-PV75202: Multi Core-Drill, laboratory asphalt core drilling machine with clamps for prisms up to 450 x 180 mm. Three speeds: 540, 1300, 1800 rpm. 2200 W, 10 A. 230 V, 50-60 Hz, 1 ph The Multi Core-Drill has been designed to be easy to use, flexible and adaptable providing users with precise drilling capabilities. This will enable users to have absolute confidence in the quality of their specimens and the reliability of their test results. Main features:
Designed, in particular, for coring samples 100 mm dia., 150 mm high for Dynamic Moduluis (AMPT, AASHTO TP79) and 38 to 75 mm high for Indirect Tensile Tests (EN 12697-24 and 26) coming, as example, from Gyratory compactors. Included as standard the Multi Core-Drill comes with the support and clamping devide that sits inside the stainless steel tray and ensures asphalt samples produced by IPC Global's PReSBOX are held firm and in the correct position for drilling. The Multi Core-Drill can also be provided with an optional device which allows for up to 80 mm transversal movement of the drill for parallel coring. This device, in combination with the longitudinal movement of the carriage, ensures high cutting alignment and increases the number of cores obtained from the same prismatic sample. Bidirectional coring is suitable for 38, 50 and 75 mm dia. See upgrading options. The innovative transversal coring clamp system allows users to obtain cylindrical asphalt specimens in 38, 50 and 75 mm dia. This unique accessory (see accessories) ensures that samples, both 100 and 150 mm dia., are securely clamped whilst drilling is commenced to provide perfect specimens every time. A unique, easy and intuitive cylindrical clamp accessory allows users to quickly and easily core asphalt specimen from cylindrical samples produced in the gyratory compactor up to 150 mm dia. The same coring can also be done, as alternative, with the KorBit machine model standardly supplied complete with adjustable clamp. The Multi Core-Drill can be used as part of your Superpave performance based testing program. |