Static Triaxial Systems
BS 1377:6 | BS 1377:7 | ASTM D2850 | ASTM D4767 | BS 1377:8 | ASTM D7181 | EN 17892-9 | EN 17892-8
Revolutionary, all-in-one automatic triaxial testing system integrating the many components of triaxial testing into one, single compact system. Designed to make triaxial testing easier than ever before, the AUTOTRIAXQube will fit neatly in any laboratory and compliment your existing testing capability.
29-WF40Q02: AUTOTRIAXQube – All-in one fully automatic triaxial testing system 110-220V, 50-60Hz, 1ph
Secure Triaxial Cell Lifting System
The new lifting mechanism allows the operator to raise the cell to its highest position and rotate it through 90 degrees, until it’s safely held in place with a magnetic latch. This removes the need to lift the total weight of the cell while freeing space on the work bench for sample preparation tools.
Built-in Ingenious Hydraulic System
Speeds up the time required to set-up the system correctly (water circuit saturation, pressure system and triaxial cell ) avoiding any possible damage to the sample already positioned in the triaxial cell.
The user-friendly optional software and desktop PC allow the operator to control all phases of testing over a fast Ethernet connection. The AUTOTRIAXQube can also connect using Wi-Fi which is useful for remote training and support. If you already use our flexible and renowned AUTOTRIAX software as part of your existing system, there is no need to invest in any additional software as the AUTOTRIAXQube can easily be integrated and controlled as an independent system by your existing PC and software:
Universal Accessories Compatibility
All existing accessories already in use with the 70 mm banded triaxial cell (28-WF4070) are compatible with the AUTOTRIAXQube.
Additional Testing with Optional Upgrades
Permeability test, Unconfined test, Bender elements, On Sample
The AUTOTRIAX 2 is an advanced triaxial testing system that can automatically perform up to 6 entire and independent tests at the same time, from start to finish, without any human intervention. The closed-loop feedback control system monitors the components status continuously, in order to react to any change in the parameter pre-set at each test stage.
Autotriax 2 can perform different kind of triaxial tests:
Also, additional software package available on request for performing:
A typical PC controlled fully automatic triaxial configuration includes:
TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories that want to perform high quality tests at high productivity levels, directly managed by data acquisition and control unit.
Triaxial cell with accessories:
The proper model can be selected from our range (see triaxial load frame TRITECH and triaxial cells for advanced applications or double wall triaxial cells required for unsaturated tests) or, as alternative, existing machines can be used.
Data acquisition and control unit:
Data acquisition and control unit transmitting data and information between the software and all the active components, such as pressure controllers and Tritech triaxial load frame.
Four models are available depending on: max pressure capacity (3500 or 1700 kPa) and number of pressure lines (one or two).
Triaxial test automatic control and processing software:
The AUTOTRIAX 2 software is a comprehensive and user-friendly interface between the operator and the testing system.