Concrete Compaction
EN 12390-2 | AASHTO T23 | AASHTO T126 | EN 12390-2 | ASTM C31 | ASTM C192
|
Vibrating tables from CONTROLS are robustly manufactured to operate with minimum noise levels. These tables operate at 3000 vibrations per minute at 50 Hz or 3600 at 60 Hz and have retaining edges to avoid the moulds from falling from the table.
55-C0158/A: Vibrating table, 630 x 400 mm, with retaining edges. 230 V, 50 Hz, 1 ph 55-C0158/B: Vibrating table, 830 x 830 mm, with retaining edges. 230 V, 50 Hz, 1 ph 55-C0158/C: Vibrating table, 1250 x 700 mm, with retaining edges. 230 V, 50 Hz, 1 ph All models can be completed with clamping device, pedal switch and multi-function control panel. 55-C0158/A1: Clamping device for 55-C0158/Ax. Weight: 3 kg. 55-C0158/B1: Clamping device for 55-C0158/Bx. Weight: 8 kg. 55-C0158/C1: Clamping device for 55-C0158/Cx. Weight: 8 kg. 55-C0158/P: Waterproof pedal switch for vibrating tables. 55-C0158/TIME: Control panel for vibrating tables with 60 seconds timer and ON/OFF switch. To be wall positioned. |
|
Vibrating plate from CONTROLS
55-C0157/B: Universal vibrating plate, 12 V Light and portable, operated by the car lighter, is ideal for field use. Suitable for vibrating plastic mould up to 150 mm and cylinder moulds up to dia. 160x320 mm. Supplied complete with elastic cord to fit the mould on the vibrating plate. |
|
Poker vibrators from CONTROLS
Three versions available:
55-C0162/E: Electric poker vibrator, dia. 25x250 mm, flexible shaft 2000mm long. 230 V, 50-60 Hz, 1 ph 55-C0163/C: Petrol operated poker vibrator, dia. 25x250 mm, flexible shaft 2000mm long. 55-C0162/BT: Battery operated pocker vibrator Ideal for the internal compaction of concrete specimens both in laboratory and in site, and a good alternative to the traditional tamping bar especially when there are large number of specimen to be compacted. Lightweigth instruments, easy to use and carry. |