Ductilometers for Ductility Test - Ductimeters

EN 13398 | ASTM D113 | AASHTO T51 | EN 13589 | EN 13703 | ASTM D6084 | AASHTO T300 | NZTA M1: 2011
The ductility test is performed for determining the ductility of bituminous materials by measuring the elongation before breaking when two ends of briquette specimens are pulled apart at a specified speed and temperature.

81-PV10A02: DUCTIMETER Ductility testing machine. 4 briquettes capacity, 1500 mm carriage travel, 5 to 100 mm/min adjustable testing speed. 
230 V, 50-60 Hz, 1 ph

81-PV10B02: DUCTIMETER High Performance Ductility Testing machine. PC-controlled, 4 briquettes capacity, 1500 mm carriage travel, adjustable testing speed from 5 to 100 mm/min, thermostatically controlled water bath 4 to 30°C, force measurement facility up to 300 N per line. 230 V, 50-60 Hz, 1 ph

81-PV10C12: DUCTIMETER Research Ductility Testing machine. PC controlled, 4 briquettes capacity, 1500 mm carriage travel, adjustable testing speed from 1 to 200 mm/min, thermostatically controlled water bath from -10 to 60°C, force measurement facility up to 500 N per line. 230 V, 50-60 Hz, 1 ph

Main features (Standard model):
  • 4 tension line (briquette capacity) x 1500 mm 
  • Easy and free access to the large testing space
  • Closed-loop PID temperature control system
  • Stainless steel insulated water bath 
  • Exclusive in-built thermoregulation system compensating the exchange of heat and cooling, resulting in a very strict temperature control, optimized by the connection to chiller (optional)
  • Adjustable speed range from 5 to 100 mm/min
  • High carriage return speed of 500 mm/min for greater productivity
  • Elongation measurement by encoder read on display

High Performance additional features:
  • Double drive screw rod
  • PC-controlled using dedicated software
  • Includes a system for measuring forces up to 4x300 N with load cells
  • Temperature range from 4 to 30°C
  • Real-time load and displacement graphics via PC

Research additional features:
  • Adjustable speed range from 1 to 200 mm
  • Includes a system for measuring forces up to 4x500 N with load cells 
  • Temperature range from -10 to 60°C
  • Elongation measurement by optical system
  • Extensive use of stainless steel for frame, cover and tank

Testing software 
  • Selection of test parameters (speed, temperature etc.) by PC. The test temperature, however, can be set in advance using the control panel of the machine.
  • Test control by PC: Start-Stop-Carriage return
  • Specimen failure recognition
  • Real-time display of load/elongation graph with advanced visualization options (single or multi-graph)
  • Data acquisition and processing conforming to Standards
  • Function for multiple test data comparison
  • Storage of test data