UNIFRAME Universal Testers
EN 12697-34 | ASTM D1559 | ASTM D5581 | EN 12697-12 | ASTM D6927 | EN ISO 7500-1 | ASTM A370
UNIFRAME series electromechanical universal testers, 50 - 100 kN cap.
The UNIFRAME universal automatic flexural and compression tester is a large machine for displacement and load controlled tests. The main advantage of this machine is its high flexibility as a general purpose testing system, ensured by its generous dimensions which allow the placement of an extensive range of accessories, and the software. A wide range of tests can be performed: CBR, Marshall, Triaxial, Flexural tests on concrete beams and tiles, Unconfined compression, punching tests and many more. 70-T1082: UNIFRAME bench stand-alone automatic compression tester, 50 kN capacity, 4 channel built-in data acquisition for load/displacement controlled testing. 230 V, 50-60 Hz, 1 ph 70-T1182: UNIFRAME stand-alone automatic compression tester, 50 kN capacity, 4 channel built-in data acquisition for load/displacement controlled testing. 230 V, 50-60 Hz, 1 ph 70-T1182/T: UNIFRAME stand-alone automatic tension/compression tester, 25/50 kN capacity, 4 channel built-in data acquisition for load/displacement controlled testing. 230 V, 50-60 Hz, 1 ph 70-T1192: UNIFRAME stand-alone automatic compression tester, 100 kN capacity, 4 channel built-in data acquisition for load/displacement controlled testing. 230 V, 50-60 Hz, 1 ph This model features a robust and compact two-column frame which is fitted with an upper crossbeam that can be set at various heights depending on the accessories to be used. The jack is driven by a DC motor controlled by the microprocessor. The load jack, DC motor and controls are housed in an ergonomic cabinet. Closed-loop control ensures reliable test execution both with displacement and load applications. No external transducer is required for displacement measurement. Sample failure is detected automatically and stops the test. Alternatively this feature can be disabled and a travel or time limit can be set instead. This model is equipped with adjustable limit switches, mounted on one column. An handlewheel is used to manually move the the platen during calibration procedure so that the load can be maintained constant with good precision. This facility can be used for the calibration of any load cell present in the laboratory and not only for the one supplied with the machine. Software user-interface allows the setting of speed/load and travel/load limits, data format download and graph settings, and saving of pre-set test procedures (up to 10 profiles can be saved in the internal memory of the machine). The firmware allows performance of up to four transducer calibrations (two load cells and two potentiometric linear transducers), saving data onboard. A real-time test graph and transducer data are displayed on the touchscreen. The front panel is fitted with an emergency button for prompt stopping of the machine. Test data can be stored on a USB pen drive or downloaded through LAN communication port in Controls, txt or ASCII format. |
70-T2502: UNIFRAME 250, Electromechanical Universal tester 250 kN cap. in compression, 150 kN in tension. 230 V, 50-60 Hz, 1 ph
The machine consists essentially of a robust two column high stiffness frame 200 kN/mm with an upper crosshead, which can be adjusted in height, and of a lower mobile bi-directional crosshead moved by an electromechanical system with a single recirculating ball screw and powered by a brushless servomotor. The machine features an advanced closed loop PID control system assuring very fast reaction time and extremely accurate test control, particularly important for FRC and FRP testing. The stress is measured by a load cell incorporated in the upper crosshead and the displacement by a high-resolution encoder. The machine is fitted with two limit switches working at upper and lower full travel and two additional limit switches adjustable by the client in the desired position, according to the specific accessory in use. A remote push-button is used to quickly position the lower crosshead. The machine is supplied complete with: - High specs PC for controlling the test - Load cell 250 kN cap. Up to three other cells of lower capacity for tests on low strength materials can be connected - Adapters to connect tensile grips and accessories - DATAMANAGER Software for compression and flexural tests Suitable for:
|