Moisture Content Determination
Moisture determination balance automatically and simultaneously dries and weighs solid samples for the determination of moisture content.
Provides a continuous direct readout for both weight and percentage moisture loss through the entire cycle. Built in timer.
19-D0602/B: Moisture determination balance, 160 g capacity, 0.001g resolution.
230 V, 50-60 Hz. 1 ph
Timer: 0-99 min with 1 minute interval
Moisture content tins from CONTROLS:
86-D1329: Moisture content tin 75 mm dia. x 30 mm
86-D1329/A: Moisture content tin 75 mm dia. x 30 mm, pack of 6
86-D1330: Moisture content tin 55 mm dia. x 35 mm, aluminium
86-D1330/A: Moisture content tin 55 mm dia. x 35 mm, pack of 6, aluminium
86-D1331: Moisture content tin 55 mm dia. x 65 mm, aluminium
86-D1331/A: Moisture content tin 55 mm dia. x 65 mm, pack of 6, aluminium
86-D1332: Moisture content tin 75 mm dia. x 50 mm, aluminium
86-D1332/A: Moisture content tin 75 mm dia. x 50 mm, pack of 6, aluminium
In stock at all times (Groundtest models):
G-D1332/NZ: Moisture content tin 75 x 50 mm (single)
G-D1333/NZ: Moisture content tin 100 x 50 mm (single)
G-D1334/NZ: Moisture content tin 100 x 115 mm (single)
Speedy moisture testers
A well established portable test method for the determination of moisture content of soils, sand and fine aggregates.
The procedure involves the reaction between water and calcium carbide which when mixed together give off a gas. The amount of gas is directly proportional to the amount of water present in the sample and results in percentage are taken from a pressure gauge.
Kits supplied with electronic balance, brushes and measure in a plastic carrying case.
47-T0023/A: Speedy moisture tester kit, 20 g cap.
47-T0024/A: Speedy moisture tester kit, 6 g cap.
47-T0020/B: Speedy calibration kit
Universal moisture testers can be used for soils, sand and fine aggregates.
The 19-T0019, -T0019/G and -T0019/H models can determine moisture contents of 2% or under on samples up to 100g in mass, the 19-T0019/F long bottle version can determine up to 20% on 20g samples, while the Speedy models are suitable for determinations of up to 20% on 6-20g of sample.
The operating principle is identical for all models: the sample is introduced into the bottle with the reagent and the water in the sample reacts with calcium carbide and produces a gas, the pressure of which is indicated on the manometer and easily converted into the percentage of moisture.
19-T0019: Classic moisture meter with analogue manometer and digital balance
19-T0019/F: Classic moisture meter, long bottle version, with analogue manometer and digital balance
19-T0019/G: Digital moisture meter with 0-3 bar high-resolution digital manometer and digital balance
19-T0019/H: Digital moisture meter with 0-3 bar high-resolution digital manometer, digital balance and log printer for printing test certificates