Concrete Specimen Curing Equipment

EN 12390-2 | ASTM C31 | ASTM C192 | ASTM C511 | ASTM C684 | BS 1881:112 | NZS 3112.2:1986
CONTROLS offers multiple curing tank models with appropriate accessories.

Zinc plated steel model:

55-C0191: Specimen curing tank, 1000 l cap. galvanized steel, complete with metal base specimen supporting grid. Max. capacity reached with 8 racks. Pump and racks not included.

It can be fit with various accessories including:
  • Immersion analogic and digital heating systems (55-C0191/10, 55-C0191/11)
  • Submersible circulator pump to maintain uniform water temperature (55-C0191/5)
  • Metal cover (55-0191/12)
  • Single upper rack (55-C0191/3)

Heavy plastic models:

55-C0193/A: Heavy plastic curing tank 650 l cap., complete with metal base.
Pump not included.

55-C0193/R: Heavy plastic curing tank 550 l cap., complete with metal base and drain cock.
Pump not included.

Ideal for site laboratory, supplied complete with robust metal internal base to hold concrete specimens without distortions.

They can be fit with various accessories including:
  • Immersion analogic and digital heating systems (55-C0193/5, 55-C0193/5R, 55-C0193/6, 55-C0193/6R)
  • Submersible circulator pump to maintain uniform water temperature (55-C0191/5)
  • Plastic cover (55-0193/A1, 55-C0193/R1)
Programmable accelerated curing tanks from CONTROLS:

55-C0194/D: Programmable accelerated concrete curing tank, hot water method, to ASTM C684 and BS 1881:112, complete with printer. 380 V, 50 Hz, 3 ph

55-C0194/DV: Programmable accelerated concrete curing tank, steam method, complete with printer. 380 V, 50 Hz, 3 ph

55-C0194/E: Programmable accelerated concrete curing tank, steam and hot water method, complete with printer. 380 V, 50 Hz, 3 ph

This special curing tanks have been designed for hot water curing or steam curing in accelerated strength concrete.
The interior is made from stainless steel. The electronic programmer can control up to four test cycles with different thermal gradients and curing time to a defined temperature value for a complete automatic curing cycle.
The control panel include a 28 column thermal printer.

Note: Cold water is supplied to the bottom of the tank in order it does not hit the specimens. 400mm is the max height between specimen supporting grid and water level.