Laboratory Thermometers & Hydrometers
ASTM D2726 | AS 2891.9.1 - 3 | NZS 4402:1986 | NZS 4407:2015 | NZTA M10
|
Center 300 handheld digital thermometer c/w single Type K thermocouple input socket.
Resolution 0.1 °C, Accuracy ±0.1 °C plus 0.7 °C, Range: -200°C to 1370°C HOM-C300: Center 300 Thermometer Type K Standard accessories include a carry case and a Type K thermocouple bead probe. Most of our customers like to put a good thermocouple inside their oven, reading with a digital thermometer. T-7003/14: Bead Probe Type K 1.5m c/w mini plug thermocouple is recommended upgrade option, especially for IANZ calibration, with much improved accuracy and stability over time. T-TP-BITUMEN: Bitumen Probe, K Type c/w T-bar Handle is recommended for bitumen testing. Probe tip is 6.3mm x 30mm and then has a thicker stem after that for rigidity. Center 375 Precision PT100 digital thermometer, at last a 2 decimal place RTD thermometer that is accurate, affordable and easy to use.
Resolution: 0.01 °C, Accuracy: ±0.05% reading ±0.1 °C, Range: -100 to 400 °C HOM-C375: Center 375 Precision PT100 Thermometer Accessories include battery, operation manual, carrying case and one TP-R04 PT100 Probe Add an IANZ test certificate for an excellent reference measurement asset for your process. Center 370 handheld PT100 digital thermometer complete with single RTD sensor is waterproof - rated IP67. The RTD sensor is a 4 wire PT100 which offer affordable accuracy.
Resolution: 0.1 °C, Accuracy: ±0.1% plus 0.4 °C, Measurement Range: -100 °C to 300 °C HOM-C370: Center 370 PT100 Thermometer IP67 IP67 water proof Housing and °C, °F scale selectable. |
|
The Multipurpose Microprocessor controlled model from CONTROLS is for professional use and, fit with the suitable probe, can be used for monitoring temperature of asphalt, concrete mortar etc.
82-D1229: Multipurpose digital thermometer, ranges -50 to + 199.9°C and -200 to +1350°C, resolution 0.1/1°C, battery operated. Probes not included. Housed in a rugged ABS case. 82-D1229/1: Penetration probe, 3 mm dia., 120 mm long 82-D1229/2: Surface probe 82-D1229/3: Air probe 82-D1229/5: Penetration probe, 250 mm long 82-D1229/6: “T” bar probe, 500 mm long to BS 594 82-D1229/7: Sword probe, 500 mm long 82-D1229/10: K type thermocouple 5 m long, complete with coupling unit |
|
Since 1910 the name ”Ludwig Schneider“ has been synonymous with the highest quality and precision ”Made in Germany“.
Today they're one of the leading global manufacturers of high-precision measuring technology for temperature and density. The high precision of Ludwig Schneider thermometers and hydrometers is used and relied on by numerous companies all over the world. |
|
Hydrometers
The hydrometer is a measuring instrument used to determine the density or the specific weight of liquids. The instrument immerses into the liquid up to the point where the weight force of the displaced liquids corresponds to the weight force of the immersed body. LS hydrometers (spindle, thickness spindle, densitometer) are manufactured in accordance with national and international standards such as DIN, BS, ASTM and ISO. Each of LS instruments is carefully calibrated and are subject to strict quality control. Measurement accuracies within the tolerance limits specified by the Physical Technical Federal Institution (PTB) are complied with in the process. Depending on the intended application our hydrometers are available in an environmentally-friendly, mercury-free version, with or without integrated thermometer, with a resolution of up to 0.0001 g/cm³ and made of plastic. We gladly supply a works calibration certificate or a traceable DAkkS calibration certificate upon request. Variants: Alcoholometers | API hydrometers | Hydrometers made of plastic | For liquid gases | For mineral oils | For dairies | For must producers | For specific gravity | Hydrometers acc. to Baumé | Density hydrometers | Saccharometers | For special applications 
|
|
Glass thermometers
Glass thermometers measure precise, network-independent and cost-effective. Because by their resistance against aggressive media they are universally usable. Calibrated instruments are serving also as reference standards to monitoring further instruments. We also offer many types of glass thermometers with eco-friendly, mercury-free filling. We gladly supply a works calibration certificate or a traceable DAkkS calibration certificate upon request. Variants: ACCU-SAFE thermometers | General purpose thermometers | Laboratory thermometers | Meteorological thermometers | ASTM-IP-BS thermometers | Special thermometers
|
|
For a complete range of Dial thermometers, General glass themometers and
IP / ASTM glass mercury free thermometers from CONTROLS, please refer to the brochure below.
|
|
Optris LS IR Thermometer Crosshair Sight
The LS is the new performance standard of infrared thermometers with spot sizes as small as 1 mm. Crosshair laser sighting marks the actual spot size at any distance. Temperature range from -35° to +900 °C. Optical resolution 75:1 Thermocouple input available in order to test contact temperature simultaneously. USB interface and graphic software with oscilloscope function. Multi function flip display. IANZ certificate available on request.
|
|
Optris MS Pro c/w Type K & Infrared
Optris MSPro for flexible temperature measurement options. Range -32 °C to 760 °C with a resolution of 0.1 °C. Single laser sighting. The emissivity is adjustable from 0.100-1.100 MAX, MIN and HOLD functions plus HIGH and LOW alarm. The USB interface allows data logging. The included thermocouple probe allows for contact and non contact temperature measurement in one instrument. Accuracy specifications for the infrared component (20 °C...760 °C) is ±1% reading or ±1 °C whichever is greater. The accuracy of the Type K probe is not specified by the manufacturer - an IANZ certificate is available on request.
|