Control consoles for advanced testing
AUTOMAX MULTITEST computerized control console represents a step change in versatility that allows modular upgrades from basic failure tests up to advanced displacement controlled tests.
The system in fact offers step-by-step flexibility to build your testing system to cover possible future testing needs. The console is supplied with DATAMANAGER software for standard failure tests to EN and ASTM, but with additional frames, accessories and dedicated software packages, your system can easily perform many tests including:
50-C20M82: Automax Multitest stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included. 230 V, 50-60 Hz, 1 ph
Automax Multitest console can be factory upgraded for a third and fourth frame connection and control. Frame selection is done via PC.
MCC, multifunctional control console, an automatic hydraulic system for static and low frequency dynamic tests on building materials under control of Load/Stress, Displacement, Strain.
Ideal both for traditional tests, such as compression and flexure on concrete, cement, mortar, blocks etc. and cyclic tests for the determination of secant elastic modulus (E), and also for measuring, for example, the ductility and fracture energy of concrete reinforced with fibres (FRC) and lined with polymers (FRP), or the toughness of sprayed concrete slabs (shotcrete) under concentrated load tests.
The console is connectable to up to four test frames (via optional factory upgrades).
50-C8422/MP: MCC, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. Allows load, displacement and strain control. PC included. 230 V, 50 Hz, 1 ph
86-D2999: Cabinet for PC and printer with three extractable shelves to hold keyboard, printer and mouse. Complete with dust prevention system with two vented filters in the cabinet housing the PC. 230 V, 50 Hz, 1 ph