Concrete Specimen Moulds
EN 12390-1, ASTM C39, AASHTO T23, AASHTO T126 | NZS 3112.2:1986
Groundtest cylinder moulds are direct result of constant improvements based on years of experience and direct customer feedback, thus making them ideal for New Zealand standards and use. Two models available:
G-C0117/LC: Lever Clamp Concrete Cylinder Mould With Lid, dia. 100x200 mm high
G-C0117: Top Clamp Heavy Duty Concrete Cylinder Mould, dia. 100x200 mm high
G-C0122: Steel Retainer for 100m dia. rubber caps
G-C0120: Rubber Cap for 100mm Dia Cyl 65 Durometer (Standard)
G-C0120H: Rubber Cap for 100mm Dia Cyl 75 Durometer (Hard)
CONTROLS cylinder plastic moulds are very practical for field use and ideal for production control.
55-C0100/PC10A: Hard plastic dia. 100x200 mm high, hard plastic splitting cylinder mould. Weight 0.9 kg approx.
55-C0100/PC15A: Hard plastic dia. 150x300 mm high, hard plastic splitting cylinder mould. Weight 1.7 kg approx.
55-C0100/PC10: Plastic cylinder mould dia. 100x200 mm high. Weight 1 kg approx.
55-C0100/PC15: Plastic cylinder mould dia. 150x300 mm high. Weight 1.9 kg approx.
The proposed CONTROLS beam moulds range from the traditional steel models conforming to ASTM standards, to the slitting plastic models, very practical for field use and ideal for production control.
Plastic beam moulds are manufactured from a robust plastic which is resistant to shock and abrasion. Ideal for field use, the specimen is ejected from the mould by compressed air requiring only a simple clean and oiling before being ready for use again.
Two sizes available:
100x100x500 mm (model 55-C0100/PB11) and 150x150x600 mm (model 55-C0100/PB15)
Steel beam moulds are available in three sizes:
100x100x400 (model 55-C0100/MB10), 100x100x500 (model 55-C0100/MB11) and 150x150x600 (model 55-C0100/MB15)