Modular Asphalt Testers
ASTM D8044 | AASHTO TP124 | EN 12697-44 | EN 12697-25B | AASHTO TP-31 | ASTM D4123 | BS DD213 | EN 12697-26C | AASHTO T322/TP9 | ASTM D7369 & NCHRP 1-28A Appendix 1 | EN 12697-24E | BS 598-111 | EN 12697-25A | AASHTO TP79 (NCHRP 9-29) | AASHTO TP107/S-VECD | EN 12697-24A | EN 12697-24D | EN 12697-26B | AASHTO T321 | ASTM D7460 | AS 2891.13.1 | AS 2891.12.1 | AG:PT/T233 | AG:PT/T274 | AS 03:2000 | NZTA M10
AsphaltQube is a fully integrated standard testing system based on the revolutionary EmS Electro-mechanical Servoactuated technology, suitable for QC / QA tests. Now you can perform the most common asphalt standards in one compact, modular, easy to use machine.
79-PV72Q02/I2: AsphaltQube, modular electro-mechanically operated asphalt tester complete with 10kN static / 15kN dynamic E-Mech actuator, 20kN load cell, 30mm actuator LVDT, -20° to +80°C temperature transducer and IMACS2 controller. 208-230 V, 50-60 Hz, 1 ph Main features:
EmS technology's main benefits:
The flexible system allows you to perform the test with AsphaltQube (permanent deformation, cyclic compression, indirect tensile stiffness, indirect tensile fatigue, crack propagation, direct tension-compression, dynamic / complex modulus) plus triaxial compression, four-point and two-point stiffness and fatigue flexural tests. The AsphaltQube can be used as part of your Superpave performance based testing program. |
The AST Pro belies the power and versatility if this fully integrated modular system.
AST Pro is based on the tried and tested technology of the AMPT Pro and its high performance servo-hydraulic labyrinth bearing actuator. 79-PV72A12: AST Pro, modular servo hydraulic asphalt tester, complete with 19 kN static/17 kN dynamic labyrinth actuator, 20 kN load cell, 30 mm actuator LVDT and IMACS. 208-230 V, 50-60 Hz, 1 ph Main features:
E-Mech technology's main benefits:
AST Pro allows to perform a wide range of tests, including the ones compatible with AMPT Pro (permanent deformation, cyclic compression, indirect tensile stiffness, indirect tensile fatigue, crack propagation, direct tension-compression, dynamic/complex modulus) plus triaxial compression, four-point and two-point stiffness and fatigue flexural tests. The AST Pro can be used as part of your Superpave performance based testing program. |