Standard Viscometers
EN 12846 | EN 13357 | ASTM D1665 | AASHTO T54 | ASTM D490 | ASTM D88 | AASHTO T72 | ASTM D7496
Standard Tar viscometer is used for determining the viscosity of cut-back bitumen and road oil.
81-B0122/C: Digital Standard Tar viscometer. 230 V, 50-60 Hz, 1 ph The apparatus, housed in a stainless steel case, consists of a tank fit with a thermostat, a rheostat, an agitator, an immersion heater to take the water to the required temperature and cooling coil for connection to the water supply. The temperature is checked by a 0-45°C thermometer. Cups, thermometer and Go/Not go gauge have to be ordered separately. |
Engler viscometer is used to determine the specific viscosity of tars and their products.
81-B0120/B: Engler digital viscometer. 230 V, 50-60 Hz, 1 ph It includes a contact thermoregulator and stirring device. Thermometers sold separately: 82-B0121/1: Thermometer ASTM 23C, range +18 +28°C, subdiv. 0.2°C 82-B0121/2: Thermometer ASTM 24C, range +39 +54°C, subdiv. 0.2°C 82-B0121/3: Thermometer ASTM 25C, range +95 +105°C, subdiv. 0.2°C 82-B0121/4: Thermometer IP 76C, range +10 +55°C, subdiv. 0.5°C, immersion 93 mm Flask and strainer: 81-B0120/2: Kohlraush calibration flask 200 ml cap. 81-B0120/4: Strainer No. 50 ASTM |
Saybolt viscometers cover procedure for the empirical measurement of Saybolt viscosity of petroleum products at specified temperatures between 21 and 99°C.
81-B0121: Saybolt digital viscometer. 230 V, 50-60 Hz, 1 ph 81-B0121/A: Saybolt two-tube digital thermometer. 230 V, 50-60 Hz, 1 ph The viscometers, available in two versions: single and two tubes, include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60 ml flask and digital thermoregulator. Funnel and withdrawal tube are not included and have to be ordered separately. 81-B0125/13: Filter funnel with wire mesh and clip 81-B0125/14: Withdrawal tube |