Particle Size Analysis Equipment

BS 1377:2 | ASTM D422 | AASHTO T88 | UNE 103 -102 | NZS 4407:2015 | NZS 4402:1986
22-D0445/B: End-over-hand Shaker is used for determining the particle density of soils by the Gas Jar method.

Consisting essentially of a motor speed reducer which rotates two clamps which holds 22-D1132: Glass gas jar, 1 liter capacity complete with rubber bung
We usually have gas jars in stock.

Suitable for NZS4402/4407 solid density tests.
Hydrometer method is used for determining the particle size distribution of very fine materials such as silt and clay. Conforming to ASTM D422 and AASHTO T88

22-T0059/A: Particle size analysis test set. Hydrometer method. 230 V, 50-60 Hz, 1 ph
The set include the following items:
22-D1006/A: Hydrometer jar, dia. 60 mm, height 430 mm. 6 pieces.
22-T0060/31: Rubber bung for 22-D1006/A
22-T0060/A: Soil hydrometer 151 H, from 0.995 to 1.038 g/ml
82-D1199: Glass thermometer 0 to 50°C, div. 0.5°C
22-T0058/A: Constant temperature water bath complete with heater, thermostat and circulating unit. 230 V, 50-60 Hz, 1 ph, Dimensions: 600x300x380 mm
22-T0060/1: High speed stirrer with cup and baffle. 230 V, 50-60 Hz, 1 ph
86-D0802: Sodium hexametaphosphate, 1000 g bottle
86-D1073: Beaker, 250 cc
All above items can be purchased individually.

Note: In order to obtain a better temperature control, the water bath can be fit with the 22-T0058/3: Cooling coil for mains water circulation

Alternative hydrometer model 22-T0060/B: 152 H, from -5 to 60 g/l

Also available, Ludwig Schneider model:
3311121: Special hydrometer BS 1377, acc. to Casagrande, Total Length: 350mm,
Range: 0.995-1.030 in 0.0005 g/cm³, Adjusting Temperature: 20°C, Without Thermometer

Other hydrometers available on request.