Concrete Saws & Mixers
CONTROLS Concrete, asphalt, rock and masonry universal saw, completed with the suitable accessory, can be used to cut concrete, asphalt and rock cores, and irregular rock samples in order to obtain geometrically defined samples.
It can be fit with 300 to 450 mm dia. blades.
55-C0210/D: Concrete, asphalt, rock and masonry saw. 380V, 50 Hz, 3 ph
The head is adjustable in height. The tilting motor head permit cuts up to 45° inclination. The tank and the trolley are zinc plated to avoid corrosion.
Complete with water pump for cooling the blade and double filtering system.
Cutting blade, and accessories to cut cores, asphalt, rock and other building materials, not included.
45-C0211/4: Diamond blade, 350 mm dia., for hard rock
45-C0211/5: Diamond blade, 450 mm dia., for hard rock
55-C0211/1: Diamond blade, 350 mm dia., for concrete
55-C0210/1: Diamond blade, 450 mm dia., for concrete
55-C0210/2: Diamond blade, 450 mm dia., for asphalt
55-C0210/5: V shaped support for cylinders and cores up to 160 mm dia.
45-C0210/6: Locking clamp device for irregular pieces.
Universal asphalt and concrete saw, MULTISAW is a unique machine specifically designed by IPC Global for laboratory use to precisely cut Asphalt, Concrete and Rock samples.
77-PV47005: MULTISAW, asphalt saw, complete with multi-slab jig. Blade not included. 400V / 50 / 3ph
An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position by a user-friendly hand wheel.
The Multisaw includes the multislab jig, complete with table and manual clamping device for slabs. Cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request).
The Multisaw allows an easy-to-use sawing system for the Four-Point Bending Beam tests, Two Point Bending Beam tests, TSRST, Texas Overlay Test, Prall Test, Semi-Circular Bend Test, Wheel Tracking Tests with large and small devices, or any concrete beam or cylinder. The system allows cylindrical cores with diameters from 100 to 150 mm, and 200 mm dia. to be quickly and accurately cut to different lengths from 10 to 300 mm.
77-PV47000/1: Diamond blade 650 mm dia. for asphalt
77-PV47000 / C1: Diamond blade 650 mm dia. for concrete
77-PV47000/2: Sacrificial PVC tube for 100 mm dia. core (consumable)
77-PV47014: Manual core locking Jig for round cores, from 38 to 200 mm diam., to cut samples with manual feeding, from 10 to 300 mm length.
77-PV47020: Trapezoidal specimens jig to be used in Two Point Bending Test, according to EN 12697-24 and 26.
77-PV47025: Jig for Wheel Tracking cores according to AASHTO T324, Semi-Circular Bend test samples according to EN 12697-44 / AASHTO TP105 / AASHTO Draft (except the notch) and Disk Shaped Compact Tension samples according to ASTM D7313 (except the notch and two holes ). 76-PV47014 is also required.
77-PV47030: Jig for Texas Overlay Test according to TX-248-F. 77-PV47011 or PV47014 is required.
CONTROLS Pan type concrete mixers have been selected for laboratory use, to prepare concrete specimens and samples. They assure the best uniformity and efficient mixing.
55-C0199/9A: Pan type mixer. Pan capacity 130l, mixing capacity 90l. Power 2 kW. 230V/50Hz/1ph
55-C0199/11: Pan type mixer, 200 l pan cap., 110 l mixing cap. 380-400 V, 50 Hz, 3 ph
55-C0199/20: Pan type mixer 300 l pan cap., 200 l mixing cap. 380-400 V, 50 Hz, 3 ph
55-C0199/9A model is supplied complete with additional interchangeable mixing paddle, particularly suitable for low slump concrete, wheels and drawbar.
55-C0199/11 and 55-C0199/20 models can be completed with optional wheels and drawbar.
55-C0199/R1: Wheels, 4” size and drawbar for 55-C0199/11 and 55-C0199/20 mixers.