Automatic Universal Testers
EN 12697-34 | ASTM D1883 | ASTM D1559 | ASTM D5581 | AASHTO T245 | EN 12697-12 | EN 12697-23 | ASTM D4123 | NF P98-251-1/4 | BS 598:107 | BS 1377:4 | NF P94-078 | AASHTO T193 | EN 13286-47 | ASTM D6927 | DIN 1996 | UNI CNR 10009 | CNR 30 | CNR 34 | ASTM D4867 | AG:PT/T232 | AS 2891.5 | NZS 4407:2015 | NZS 4402.6.1.2:1986 | NZTA M10
The new automatic MULTISPEED is a versatile stand-alone machine; an ideal solution for road testing laboratories and generally for any test that requires displacement/speed control.
The 50kN capacity and fully variable speed of 0.05 to 51 mm/min make it possible to perform not only CBR and Marshall tests, but also many other applications such as indirect tensile, quick undrained triaxial and unconfined/uniaxial soil tests. The machine has built-in data acquisition with four channels dedicated to two strain gauge load cells and two potentiometric linear transducers; one of each can be used during the test. We recommend a complete set of accessories, fully equipped to perform most common tests in New Zealand. 34-V1172: MULTISPEED automatic compression tester, 50 kN capacity, 4 channel built-in data acquisition and variable speed from 0.05 to 51 mm/min. 230V, 50-60Hz, 1 ph 34-V0107/CM: Test set to perform CBR and Marshall tests in digital mode (includes load cell 50 kN cap.) 70-SW/CMU: PC software for Marshall, CBR, Indirect Tensile and universal tests 82-P0370: Strain gauge load cell, 2.5 kN cap. 82-P0373: Strain gauge load cell, 10 kN cap. 70-T0108/5: Load cell extension 34-T0104/4: Upper and lower platens for unconfined compression test 76-B0078/F: Frame for tensile splitting device (Lottman Breaking Head) Conforming to EN 12697-23, ASTM D6931 and AASHTO T283. To be completed with suitable pair of loading strips. 76-B0078/F1: Pair of loading strips for 100 mm dia. samples 76-B0078/F2: Pair of loading strips for 150 mm dia. samples |
The UNIFRAME universal automatic flexural and compression tester is a large machine for displacement and load controlled tests.
The main advantage of this machine is its high flexibility as a general purpose testing system, ensured by its generous dimensions which allow the placement of an extensive range of accessories, and the software. A wide range of tests can be performed: CBR, Marshall, Triaxial, Flexural tests on concrete beams and tiles, Unconfined compression, punching tests and many more. 70-T1192: UNIFRAME stand-alone automatic compression tester, 100 kN capacity, 4 channel built-in data acquisition for load/displacement controlled testing. 230 V, 50-60 Hz, 1 ph |